FREE SHIPPING WORLDWIDE
USD

Curtain Measurement Guide

GROMMET CURTAINS

Length

If you want to have measurements for grommet curtains, first of all take an estimate from the height of your drapery shaft to the ideal end point. At that point you have to include 1.5 inches to this estimation. This ought to be the last length you will be giving us as the details for your custom order. 1.5 inches are added additionally towards the end to represent the 'upstand' which is the aspect of the texture that remains over the curtain pole.

Width

We suggest you that if your drape shaft is 36 inches wide, do not use two panels of 18 inches rather try opting for two panels which are 36 inches each This will help you to get a lavish fall of your curtains. On the off chance that your curtain shaft is 36 inches wide and you request curtains that are likewise 36 inches wide in and out, they will be totally levelled without any creases.

Up to multiple times width is likewise enthusiastically suggested for sheers and lightweight textures, for example, linen. These textures have less body volume and consequently need more width to accomplish similar full look as fabrics, for example, cottons and polyesters. More width likewise helps upgrade privacy where light weight fabrics are being used.

You have to measure the width from the left to the right corner. Once the measurement is done, give us the measurement by adding 4 to 5 inches in that estimate. This will make you curtains look more silky when hanged.

Bigger size for curtains such as 2 inch inward distance across and different completions are accessible on demand. It would be ideal if you keep in touch with us at info@curtainera.com to enquire about alternatives or send us a note once you have submitted your request.

ROD POCKET CURTAINS (WITHOUT HEADER)

Length

For making measurements for the rod pocket curtains that are without header you merely have to measure the length for the curtains from the top height of the curtain rod till the end point. This measurement is enough to provide in your order details.

Width

In case your drapery pole is 36 inches wide, we recommend using two panels that are of 36 inches. Using 36 inches panel will help you to get an extravagant fall of the curtain giving it a luxurious look.

For instance, your curtain shaft is 36 inches wide and you request panels that are likewise 36 inches wide inside and out, the curtain will drift without any creases or fall and hence will not portray an elegant look.

For a significant level of completion, request up to multiple times the width of pole for pocket style particularly if you are using lightweight textures, for example, the linen fabric. As these textures have low volume, therefore, will have more width for being graceful.

ROD POCKET CURTAINS (WITH HEADER)

Length

To take measurements for the rod pocket curtains that are with the header, first measure the length from the height of the pole to the endpoint. Then add two inches to this measurement for the two-inch header on top. This ought to be the closing length for the customized rod pocket curtains.

Width

If your curtain shaft is 36 inches wide, we suggest utilizing two panels that are of 36 inches. Utilizing 36 inches panel will assist you with getting an extreme fall of the curtains giving it an elegant look.

For example, your curtain shaft is 36 inches wide and you demand panels that are likely 36 inches wide all around, the drapery will hang without any and henceforth will not depict an elegant look.

You can also demand up to various width for rod-pocket style curtains especially if you are utilizing lightweight fabrics, like the linen texture. As these surfaces have low volume in this way they will have more width for a classic look.

FLAT PANEL DRAPERY

Length

To take the measurements for the flat panel curtains, then the length ought to be estimated from the height up to the ideal endpoint. This will take into account the actual length of the curtains.

Moreover, if you are willing to hang your curtains using curtain clips then it is recommended to measure the length from the ground as in the base of the window curtains till the ideal endpoint.

Width

All things considered; we suggest requesting multiple times the shaft width such as two panels of 36 inches for a 36-inch rod for instance. If you need decent, standard curtains then you can also go for two panels each of 54 inches for a 36-inch rod for instance for a lavish look.

If you choose to use lightweight fabrics for your curtains then we additionally suggest a generally higher width 2-3 times more than the actual width. These textures have low body volume and in this way need more width to accomplish a similar look for the curtains.

PENCIL PLEAT CURTAINS

Length

For pencil pleat curtains, embed the heading tape guides into the top line of pockets to balance the drape beneath the shaft or track. Add the guides into the lower line of pockets for the heading to cover the track.

If the curtain is suspended from a track then length ought to be estimated from the head of the track up to the ideal endpoint.

Width

If you have a 36 inches wide curtain pole than it is better to use two panels of 36 inches but do not use two panels of 18 inches. This will help you to get an elegant look of your curtains by increasing the fall of the fabric.

This is done because if you will use 36 inches curtains as well as a 36 inches pole this will cause your curtains to hang flat.

Up to multiple times width is likewise strongly suggested for the lightweight textures, for example, linen. These textures have less body volume and consequently need more board width to achieve a similar full look as textures, for example, cotton.

TIE TOP CURTAINS

Length

We stitch tie top curtains with almost 9 inches long ties that are headed at the top. The panel length ought to be estimated in this manner from where you would like the tie top loop fall to begin up to the ideal endpoint.

Width

Our overall rule for tie top curtains is to arrange the curtains in such a way that they are double the width of your drape track. For instance, if your drapery shaft is 36 inches wide, we propose to have two panels which are 36 inches wide each. This will give the curtains an amazing look because of its extravagant fall. On the off chance that your curtain pole is 36 inches wide and you request drape panels that are likewise 36 inches wide by and large, they will hang flat without any creases or fall.

For an elevated level of completion, request up to multiple times the width of the shaft. It is recommended to use multiple widths for lightweight and delicate fabrics such as linen. This will help to increase the finishing look of the curtains because of the fall. Otherwise using the same width for the pole and the curtain will cause the curtains to hang flat which will not look good.

PINCH PLEAT CURTAINS

Length

To hand the pinch pleat curtains, embed the hook into the drape marginally aside of the pinch pleat. Then insert a couple of hooks and afterward hang the curtains while holding the rest of the drapery. Once you have hanged the curtains, check if they are correctly hanged and ok to go.

After hanging measure, the length of the curtain from the top height of the track. This will consider the texture to cover the track itself.

Width

To measure the exact width of your drapery shaft/track you have to add approximately 8 inches to the measured estimate. This ought to be the finalized width of your curtains. For instance, to cover a shaft of width 40 inches, we suggest all out the width of the panel to be 48 inches (40" + 8").